Category Archives: Trading Services

Trading Services

Side channel blower of the SKVTechnik wash salad

The salads diving basin described today is manufactured by B. Miller Maschinenbau GmbH from Aspach. SKVTechnik supplies the side channel compressors.

Side channel blower of the SKVTechnik wash salad

Salad washing machine with side channel blowers of SKVTechnik

For injecting the compressed air into the bubble bath, the SKVTech’s channel compressors are used. The bubble bath is the heart of the salad washing machine.

Functionality:

Side channel blowers permanently blow compressed air into the water of the immersion basin of the salad washing machines, literally causing the washing water to boil. The vegetables, which are guided by the bubbling water of the dip tank, are cleaned of adhering soil and dirt and prepared for sale. Lettuce, lettuces, cucumbers, spinach or parsley are particularly suitable for cleaning in salads. If customers buy these products in stores in the future, then it is possible that they were cleaned and packaged by washing machines from B. Miller Maschinenbau in Aspach. Side channel blowers from SKVTechnik have pressed the air into the plunge pool.

The production process is the following:

The plants are washed directly in the vegetable crate. This fact makes the washing process effective, because the fruit is packed directly into the transport box on the harvester and thus additional packing operations can be saved. To operate the salad washing machine only a worker is necessary, which takes over the loading of unwashed salad on the front and the removal of the washed vegetables on the back.

The employee places the vegetable crates on the conveyor belt and these drive under the conveyor belt under water into the air-fed bubble bath. The water circulation in the bubble bath washes the earth out between the plant leaves. When the transport crates have crossed the bubble bath with the vegetables, the plants are subsequently rinsed with fresh water.

Depending on the degree of contamination of the vegetables and depending on the type of vegetables, the speed of the conveyor belt is variably adjustable. The user can therefore respond to different levels of pollution and plant species and then adapt the machine. The side channel blower always blows with full pressure into the plunge pool, so that the strongest turbulence of the water takes place and a quick and effective cleaning of the plants takes place per unit of time. With the illustrated machine, up to 400 vegetable transport boxes can be washed per hour.

How does the saladsink work exactly?

The entire processing section in the machine is provided with a conveyor belt. The conveyor belt picks up the salad boxes and conveys them into a plunge pool, bringing the boxes under water into a sink. Due to the length of the pelvis and the transport speed of the conveyor belt, the length of stay of the vegetable crates under water is longer or shorter. The transport speed of the conveyor belt can be influenced by the operator. The operator can therefore respond to different levels of pollution and different plant species. Having arrived in the plunge pool, the decisive washing process is now carried out. A side channel blower pushes air through a pipe system and various outlets into the water of the dip tank. The rising bubbles set the water in motion, similar to when it boils. The bubbling water washes on the salad adhering soil or other pollution. This process continues as long as the salad box is in the dip tank. At the end of the dip tank, the conveyor belt carries the salad boxes back up over the water surface. There, the salad is again sprayed with fresh water. The employee removes the cleaned salad with the transport crates from the conveyor belt.

SKVTechnik recommends a suitable side channel compressor:

For the production of compressed air for the above-described salad washing machine by means of a side channel blower SKVTechnik today proposes a S3-1-219-2,2kW-3. This model is equipped with a three-phase motor (3-phase). There are also models with 1-phase motor available. Approx. 175 m³ of air per hour can be expected at the depths of approximately 0.50 m in the plunge pool of the salad dipping machine. This amount of air keeps the water moving properly and creates a good wash around the salad to be washed.

The S3 is an Italian machine and achieves a volume capacity of 219 m³ / h with the throttle open and a maximum blowing pressure of 250 mbar. The machine has a delivery time of one week within Germany. This applies to orders in the SKVTechik online shop. SKVTechnik offers all Side Channel Compressor categories. From the small 0.2 kW motor to the 36 kW motor, every desired machine type is available. Customers are now convinced by the advantages of buying online at SKVTechnik.

SKVTechnik – Onlineshop

Strassberger Str. 31

08527 Plauen

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Side channel blower of the SKVTechnik wash salad

The salads diving basin described today is manufactured by B. Miller Maschinenbau GmbH from Aspach. SKVTechnik supplies the side channel compressors.

Side channel blower of the SKVTechnik wash salad

Salad washing machine with side channel blowers of SKVTechnik

For injecting the compressed air into the bubble bath, the SKVTech’s channel compressors are used. The bubble bath is the heart of the salad washing machine.

Functionality:

Side channel blowers permanently blow compressed air into the water of the immersion basin of the salad washing machines, literally causing the washing water to boil. The vegetables, which are guided by the bubbling water of the dip tank, are cleaned of adhering soil and dirt and prepared for sale. Lettuce, lettuces, cucumbers, spinach or parsley are particularly suitable for cleaning in salads. If customers buy these products in stores in the future, then it is possible that they were cleaned and packaged by washing machines from B. Miller Maschinenbau in Aspach. Side channel blowers from SKVTechnik have pressed the air into the plunge pool.

The production process is the following:

The plants are washed directly in the vegetable crate. This fact makes the washing process effective, because the fruit is packed directly into the transport box on the harvester and thus additional packing operations can be saved. To operate the salad washing machine only a worker is necessary, which takes over the loading of unwashed salad on the front and the removal of the washed vegetables on the back.

The employee places the vegetable crates on the conveyor belt and these drive under the conveyor belt under water into the air-fed bubble bath. The water circulation in the bubble bath washes the earth out between the plant leaves. When the transport crates have crossed the bubble bath with the vegetables, the plants are subsequently rinsed with fresh water.

Depending on the degree of contamination of the vegetables and depending on the type of vegetables, the speed of the conveyor belt is variably adjustable. The user can therefore respond to different levels of pollution and plant species and then adapt the machine. The side channel blower always blows with full pressure into the plunge pool, so that the strongest turbulence of the water takes place and a quick and effective cleaning of the plants takes place per unit of time. With the illustrated machine, up to 400 vegetable transport boxes can be washed per hour.

How does the saladsink work exactly?

The entire processing section in the machine is provided with a conveyor belt. The conveyor belt picks up the salad boxes and conveys them into a plunge pool, bringing the boxes under water into a sink. Due to the length of the pelvis and the transport speed of the conveyor belt, the length of stay of the vegetable crates under water is longer or shorter. The transport speed of the conveyor belt can be influenced by the operator. The operator can therefore respond to different levels of pollution and different plant species. Having arrived in the plunge pool, the decisive washing process is now carried out. A side channel blower pushes air through a pipe system and various outlets into the water of the dip tank. The rising bubbles set the water in motion, similar to when it boils. The bubbling water washes on the salad adhering soil or other pollution. This process continues as long as the salad box is in the dip tank. At the end of the dip tank, the conveyor belt carries the salad boxes back up over the water surface. There, the salad is again sprayed with fresh water. The employee removes the cleaned salad with the transport crates from the conveyor belt.

SKVTechnik recommends a suitable side channel compressor:

For the production of compressed air for the above-described salad washing machine by means of a side channel blower SKVTechnik today proposes a S3-1-219-2,2kW-3. This model is equipped with a three-phase motor (3-phase). There are also models with 1-phase motor available. Approx. 175 m³ of air per hour can be expected at the depths of approximately 0.50 m in the plunge pool of the salad dipping machine. This amount of air keeps the water moving properly and creates a good wash around the salad to be washed.

The S3 is an Italian machine and achieves a volume capacity of 219 m³ / h with the throttle open and a maximum blowing pressure of 250 mbar. The machine has a delivery time of one week within Germany. This applies to orders in the SKVTechik online shop. SKVTechnik offers all Side Channel Compressor categories. From the small 0.2 kW motor to the 36 kW motor, every desired machine type is available. Customers are now convinced by the advantages of buying online at SKVTechnik.

SKVTechnik – Onlineshop

Strassberger Str. 31

08527 Plauen

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

SKVTechnik recommends: Side channel blower for protective gas delivery

Argon production is also a work area for side channel blowers of SKVTechnik. Customers like to use the industrially heavy-duty machines for their systems as endurance runners.

SKVTechnik recommends: Side channel blower for protective gas delivery

K07 RMD

Side channel blowers are also used in industry for the transport and compression of noble gases. As long as gases are not flammable or explosive, side channel blowers can be used well for compression or extraction. Especially when higher pressures have to be overcome.

For the exemplary operating point of a volume of approx. 100 m³ / hour at approx. +600 mbar, SKVTechnik recommends a side channel blower K07 RMD 5.5kW with TMS impregnation and sealing. The K07 with the 5.5 kW engine provides approx. 95 m³ / h at a system back pressure of 600 mbar. The volume flow can be controlled by connecting a frequency converter together with the pressure.

Argon is a noble gas, which is used in industry as welding gas, inert gas or carrier gas. The gas is thus used to prevent the penetration of traces of reactive gases in a reaction environment. But the presence of argon and the flow around the reaction vessel with argon excludes traces of reactive gases. Argon is transported by the side channel compressor and blown into the reaction environment. Of course, the argon must retain its purity content to work and prevent unwanted reactions. The promotional side channel compressor must therefore not suck in air components. The side channel blower of SKVTechnik, which is intended for this purpose, is specially sealed for this purpose. A corresponding certificate is issued for each side channel blower to be delivered separately.

The SKVTechnik online shop has been operating in the European market since 2012 and supplies customers with consistent quality and delivery reliability. Customers benefit from good purchase prices and high volumes. Interested parties are now trying out the SKVTechnik service.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnology Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

SKVTechnik recommends: buy side channel blowers from SKVTechnik with accessories

Accessories for side channel blowers can be expensive or cheap. SKVTechnik recommends that you order accessories for side channel blowers at the same time you buy the side channel compressor machine.

SKVTechnik recommends: buy side channel blowers from SKVTechnik with accessories

Ein typischer ATEX – Seitenkanalverdichter

Side channel blowers are ordered more and more online at SKVTechnik. The reason for this is the fact that side channel blowers are relatively universally applicable and the manufacturer standards are common in the industry. The requirements for side channel blowers are well defined. Side channel blowers provide specific pressure / volume ratios depending on their drive and design, which can then be reproduced in a so-called power curve. There are two-stage and one-stage side channel blowers. You can switch them side by side or one behind the other, thus influencing the performance.

Side channel blowers have a number of accessories. There are suction guards, various types of filters, safety valves, skiving silencers, pipe silencers, reversing valves, soundproof hoods or vibration dampers. Side channel compressors can be specially sealed against certain media, such as high air humidity. In potentially explosive atmospheres ATEX – suitable compressors are used. These are approved for use in potentially explosive environments and are specially equipped. They comply with the conditions of the ATEX directive of the European Union (EU).

Intake protection is required by the user so that no foreign substances enter the intake channel. A specially shaped metal net in front of the intake channel prevents uncontrolled suction of solids. Side channel blowers must be secured before sucking in solids. Between the rotor and the stator there are very small clearances, which lead to the compression of the air. If solids enter these columns, the side channel blowers will break down sooner or later.

Filters fulfill similar functions as intake protection. Only significantly smaller particles from the intake air are filtered. Again, no solids may be sucked into the compressor area.

Safety valves ensure the right pressure. Side channel blowers have well-defined pressure-volume curves. If the permissible values (indicated in the parameter curves of the machines) are exceeded, this can lead to the compressor being switched off. Safety valves are used to maintain the parameter values. If the parameters in pressure or volume are due to exceptional process events in non-approved areas, same safety valves, mounted in the suction or pressure channel, these values. The side channel compressors can again convey so much volume that they carry away their own process heat.

Silencers are mounted in the intake or exhaust duct. They clearly serve the smokescence. They are used especially where side channel blowers are operated in the vicinity of people. Often even the side channel blowers themselves do not generate the noise, but rather the air that is emitted or sucked in.

Change-over valves reverse the air flow abruptly. Change-over valves are connected directly to the side channel blower and reverse the direction of flow at the push of a button. There are now also reversing valves that are able to promote the air flow in a circle and thus drive the system without pressure.

Soundproof hoods are small boxes in which side channel blowers are installed. Depending on the machine category, soundproof hoods are then ventilated. The heat generated by the enclosed side channel compressors is removed by fans from the sound enclosure. Soundproof hoods are used in addition to the sound insulation and the protection of the side channel compressor from environmental influences.

During operation, side channel blowers run quietly. Due to years of operation, it can happen that side channel blowers run restless. Vibration dampers are used against these vibrations. These are small rubber buffers that are mounted between the bottom plate or side channel cover and floor or wall bracket.

Customers purchase accessories at the very best when purchasing the side channel compressor. This can save unnecessary transport costs. SKVTechnik is an online retailer of side channel blowers. Over three hundred different machine types are available. Customers are expertly operated by manufacturer consultants and thus receive the best advice from professionally trained personnel for the most favorable machine prices.
Customers are testing SKV technology.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnology Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

SKVTechnik recommends: Using safety valves when operating side channel blowers

The use of pressure / vacuum safety valves is not mandatory when using side channel blowers. However, SKVTechnik strongly recommends installation in the pressure or suction line.

SKVTechnik recommends: Using safety valves when operating side channel blowers

pressure / vacuum safety valves – how to install this parts

Side channel blowers of SKVTechnik have to be protected against total failure for various reasons. For one, financial reasons play a role, of course.
Another important point is that side channel blowers are usually in operation as endurance runners. They perform their work in many plants without the need for daily control. Often, the sub-processes in which side channel blowers are used are system-critical. This means that the failure of a side channel blower can lead to system stop. Production failure and downtime of the plant threaten.
What few users know is that side channel blowers do not have their own shutdown device for an emergency situation. Few devices have a shutdown device in case of overheating. Especially if side channel blowers work against a closed throttle, then the total loss of the device threatens. If side channel blowers work against a closed flap and can not deliver air, the pressure rises above the maximum pressure values indicated in the curves and the machine will inevitably break down. Users then find faulty electric motors and deformed rotors on the defective machines. In most cases, parts of the machine housing are discolored blue or dark due to overheating and the blades of the rotors inside the machines are bent due to excessive pressure conditions.

Side channel blowers should always be protected from full throttle closure. Users can do this with so-called pressure / vacuum safety valves. Safety valves are installed in the suction or discharge line of a side channel blower. During commissioning, the safety valves are set to the maximum pressure values of the machine to be secured and trigger when the permissible pressure values are exceeded. The balancing effect of the safety valves means that the machine / side channel blower can never enter the critical, non-permissible pressure zones because the safety valves open the pressure or suction line in advance. This ensures that the side channel blower can be safely operated as a long-running even without supervision.

Safety valves for side channel blowers can be purchased at a fraction of the cost of a side channel blower. There are models for printing and vacuuming and models that can be used universally. Particularly flexible valve variants can also be adjusted by the customer and can thus be used very flexibly and with different devices. Together with a manometer, users are thus able to install safety valves themselves and set them reliably. At SKVTechnik customers already receive professional valves for 100 to 200 euros.

SKVTechnik is an online retailer of side channel blowers. Over three hundred different machine types are available. Customers are expertly operated by manufacturer consultants and thus receive the best advice from professionally trained personnel for the most favorable machine prices.
Customers are testing SKV technology.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnology Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Work at a Business Center

De Soet Consulting offers great offices

Work at a Business Center

The concept of a Business Center is actually rather simple, yet it is very effective. Whether as a short term or a long term solution, the offices are completely equipped with a perfect office infrastructure and high qualified employees. De Soet Consulting is a Business Center with a very good reputation and a lot of experience.

Renting an office at De Soet Consulting is a perfect solution if you want to expand your business to a different region. It is simple, uncomplicated and cheap. You do not have any launching costs, no investments and a flexible term of lease. Rieta de Soet, CEO of De Soet Consulting says, the availability of offices in a Business Center is a great benefit for companies coming from abroad, because they get a helping hand from the employees who speak the local language and know the culture and costums.

It is also a good solution for a young entrepreneur, who wants to start self-employment. He gets all the help and information he needs from an experienced and high qualified staff.

Furthermore De Soet Consulting offers an individual telephone service, backoffice, marketing service, translating services, conference rooms and helps building up your marketing organization. No matter what your needs are, De Soet Consulting offers a personal and professional service to absolutely amazing prices, says Dr. Fabian de Soet.

De Soet Consulting ist eine Beratungsgesellschaft mit einem Team von Betriebswirten, Steuerberatern, Marketing- und Unternehmensberatern, die über eine 20-jährige Beratungserfahrung verfügen. De Soet Consulting betreut weltweit in Amerika, Asien und Europa Kunden, die ihren bisherigen Standort verlagern oder eine neue Firma gründen wollen. De Soet Consulting bietet Komplettlösungen für Unternehmen an, die ihren Standort verlegen oder einen neuen Standort gründen wollen.

Contact
De Soet Consulting
Rieta Vanessa
Gubelstrasse 12
6300 Zug
Phone: 0041 41 560 36 00
E-Mail: pr@news-channel.ch
Url: http://www.desoet.ch

Trading Services

Side channel blower – Adjust the limitation valves professionally

Limit valves are essential for the safe operation of side channel blowers. Side channel blowers operate in suction mode and in pressure mode. Secure limit valves.

Side channel blower - Adjust the limitation valves professionally

side channel blower – ATEX relevant

The safety valve (limiting valve F) described here by SKVTechnik can be used both as a pressure limiting valve and for operation as a vacuum limiting valve. It is delivered not parameterized in the factory and must therefore be set by the customer before use.

Why is it important to use a limit valve?
Side channel blowers are valuable devices that usually run in continuous operation and unattended. If the suction or pressure channel is closed, then the side channel blower motors continue to work and build up enormous pressure. The force can not be carried away with the air and the rotor presses more and more against the compression. The rotor blades twist. If necessary, the device heats up so much during this process that the winding insulation of the motor melts and a short circuit occurs. The machine suffers a total loss with a damage amount exceeding the replacement cost.

How does a limit valve work?
If they are correctly adjusted, the SKV limit valves act as a safeguard against excessive pressure. If the predefined pressure builds up in the machine and is exceeded, then limit valves open the airflow and the machine can release excess pressure from the system. The machine can continue to work and will not break. It is important that the operating point of the limit valve is correctly set to the respective machine.

How to adjust the limit valves of the SKVTechnik?
The limiting valve of the SKVTechnik is individually applicable to the different side channel compressors in the range from 0,2KW to 25 kW. For this purpose, the valve is supplied with two springs of different strengths. Each spring is designed for a specific pressure-vacuum power range. Valves VRL8 and VRL9 have the possibility to use both springs in parallel. Customers convince themselves with the supplied selection diagram that the valve is the right size and depending on the operating point select one of the two springs or both springs from the overview table (see also here: http://seitenkanalverdichter-technik.de/produkt/begrenzungsventile/) ,
* Remove the two plastic caps
* Attach the valve to the pressure bypass and connect a pressure gauge.
* Loosen the screw 923 (description enclosed) and reduce the spring pressure on the upper adjusting screw with the adjusting key supplied.
* Turn on the fan and create the maximum pressure.
* Adjust the upper adjusting screw until the maximum permissible pressure is reached (observe manufacturer’s instructions).
* Fix the screw 923.
* Opening the pressure channel.
* Carefully check the settings.

If customers have further questions for the use of side channel blowers, then they simply turn to the experts of SKVTechnik. A team of employees takes care of the solutions for customers and their plants. SKVTechnik calculates and offers designs for side channel blowers. Consultations on site are possible. Delivery times of 1 – 2 weeks or units on trial are normal delivery times.
Another major field of activity of SKVTechnik is the sale of side channel compressors as well as the sale of fans. Since 2015 SKVTechnik has been trading with fans from different manufacturers. Fans are highly individually equipped machines, which are usually adapted to customer requirements. When searching for solutions with fans, customers are most likely to contact SKVTechnik’s sales department directly.

Press contact:
SKVTechnik Klaus Doldinger Straßberger Str. 31 08527 Plauen Phone +49172 7799600

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Printing on polyester Textiles

Unique solution for printing polyester based surfaces and textiles with Ghost Sublime toner for laser printers.

Printing on polyester Textiles

Products made using Ghost Sublime

Ghost White Toner is best known for offering white toner cartridges for various HP, Samsung and Lexmark office laser printers. By replacing the black toner cartridge with a Ghost White Toner, customers can transform their laser printer into a white toner printer. In combination with transfer films for textiles or solid surfaces, dark textiles and other products can be easily personalized.

Sublimation printing is a widely used process for printing on various polyester or polymer-coated surfaces. In this process, a dye becomes gaseous under heat and pressure and thus transfers the design permanently into the substrate. Common substrates are mobile phone cases, mugs, t-shirts, banners, flags, trophies and other merchandise items.

This technology was only available on inkjet printers. With Ghost Sublime Toner, customers can easily transform their HP laser printer into a sublimation printer by replacing the standard CMYK toner cartridges with a set of Ghost Sublime Toner CMYK. Designs such as photos, vector graphics and logos, printed on plain copy paper can now easily be transferred to sublimation-friendly surfaces.
No special software or transfer paper is required for sublimation printing with Ghost Sublime Toner.
Ghost Sublime toner is now available for HP Color Laserjet Pro M452 and HP Color Laserjet Pro M252. In these devices, the tried and tested Ghost White Toners can also be used to personalize dark surfaces and textiles. The investment in different systems for toner transfer and sublimation is no longer necessary.

Ghost White Toner and Ghost Sublime Toner can be tested live at FESPA Europe in Berlin. Visit us in hall 4.1 booth D60
FESPA GLOBAL PRINT EXPO 2018
15.05. – 18.05.2018 MESSE BERLIN

Ghost GmbH aus Düsseldorf ist ein 2015 gegründetes Start-Up, das den Weißdruck auf Laserdruckern erstmals einer breiten Kundengruppe öffnet. Firmengründer David Kandelhardt ist seit 15 Jahren in der Drucker-Branche aktiv. Ghost will den Weißdruck auf Laserprintern salonfähig machen.

Mehr Infos:
Web: http://www.ghost-white-toner.com/

Social Media:
https://www.facebook.com/ghostwhitetoner
https://instagram.com/ghostwhitetoner/
https://www.pinterest.com/ghostwhitetoner/
https://twitter.com/ghostwhitetoner

Contact
Ghost GmbH
David M. Kandelhardt
Vogelsanger Weg 38
40470 Düsseldorf
Phone: 0211-37067-55
E-Mail: mail@ghost-white-toner.com
Url: http://www.ghost-white-toner.com

Trading Services

Side channel blowers – background knowledge on faults, defects and maintenance

SKVTechnik reports on proper behavior in case of faults, defects and maintenance of side channel blowers.

Side channel blowers - background knowledge on faults, defects and maintenance

Installation instructions for side channel blowers

Maintenance ( SKVTechnik hints for maintenance):

Before starting scheduled maintenance or before repairing or repairing the device, take the following precautions:

– Turn off the main switch to disconnect the device from the mains.
– Attach a sign to the system control and controls of the device with the inscription: „DANGER! Maintenance work in progress. „
– Let the device cool down!

– Wait until the device is completely stopped, d. h., The fan of the electric motor and consequently the impeller no longer rotates.
– Before disconnecting lines, make sure that there is no negative pressure or overpressure in them and that no liquids can escape from the device or system!
– Observe the maintenance instructions in this operating manual.

Risk of cutting or shearing due to the impeller rotation.
Through the openings of the machine housing and cover, after removing the connecting elbows or blind flanges, access is gained to the rotating impeller! In no case the hands or objects by the o. G. Insert openings.

Dangerous electrical voltage!
Inappropriate behavior can cause serious injury! Work on the electrical equipment may only be carried out by qualified and qualified electricians! Before working on the device or the system, the following precautions must be taken:
– Disconnect the mains voltage;
– secure the device against restart;
– only open the terminal box after making sure that there is no voltage.

Danger due to hot surfaces!
Under operating conditions, the unit could overheat, exposing the operator to hot surfaces. Do not touch the device during operation. Let it cool after switching off and wait at least 20 minutes before any intervention.
Danger due to rotating components: Cooling fan of the electric motor.
Although all measures have been taken to reduce the existing hazards during development, there are residual risks due to fan rotation.

Protective measures against risks:
– Do not wear loose or hanging clothes.
– Do not approach with open long hair.

Danger due to the noise level of the device!
Some machines can develop a high level of noise, even over 80 dB (A). The reference values (without consideration of the room reverb) are given in the table of technical data. Protective measures against risks:
Determine the actual sound pressure of the machine at the installation site and if necessary:
– Mark areas with noise hazard accordingly
– prescribe the use of PPE
– isolate the room.

SKVTechnik is an online retailer of side channel blowers. Over three hundred different machine types are available. Customers are expertly operated by manufacturer consultants and thus receive the best advice from a professionally trained specialist for small machine prices.
Customers are testing SKV technology. Rebates are almost 100% passed on to customers, which keeps customers‘ purchase prices low.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnik ATEX Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Side channel blower – SKVTechnik ships within Europe within one week

The side channel blowers from SKVTechnik will ship within Europe within one week. Good prices and super quality are the trademarks of the online retailer from Germany. Now there are short delivery times in European countries.

Side channel blower - SKVTechnik ships within Europe within one week

Various connection types of side channel blowers for different system requirements.

SKVTechnik – the online retailer of side channel compressors and fans has been on the market since 2012. Users receive the complete range of side channel blowers and fans from various German and European brand manufacturers. From the smallest 0.2 kW device to the power compressor with 25 kW power and 300 kg machine weight.

SKVTechnik buys side channel compressors in large quantities at favorable conditions from the manufacturers and sells these stocks with good prices to the users. The prerequisite for the long-standing existence of SKVTechnik is reliability, brand loyalty and brand quality. Chinese products are no longer offered. The devices have between statutory two years and voluntarily granted 3 years warranty. SKVTechnik can only do this in the background with strong manufacturer partners.

Which machine types are in the permanent offer? These are side channel blowers and fans. Here is a brief overview of the principles of action:

Side channel compressors draw in air from the environment or from a process and produce pulsation-free and oil-free compressed air. The side channel compressor runs largely without mechanical loss. Although only a hundredth of a millimeter gap is between the rotor and the stator, the rotor still runs without contact against the stator. This makes the side channel compressor a perennial. The side channel blowers of SKVTechnik are of course designed for continuous operation. Side channel blowers often last for years with good care and occasional maintenance.

Fans have a different operating principle than the side channel blowers. Fans operate at much higher flow rates and much lower pressure than the side channel blowers. Fans often have larger gaps between rotor and stator and, depending on the design of the fan, also transport solids. Due to the volume-pressure characteristics mentioned above, fans are used for applications other than side channel blowers.

SKVTechnik offers both machine types and operating principles. If customers are interested in consulting, SKVTechnik specialists will be happy to evaluate customer plant situations and propose or offer suitable equipment for customers.

Short delivery times are required:
The delivery times are short. 80 percent of the side channel blowers are in stock at SKVTechnik. If side channel blowers are available on stock, then on a Monday order, the device will be on the customer’s Friday. Depending on the storage location, customers can pick up the devices on site.

In this specific case, interested parties can contact the hotline of SKVTechnik +49 3741 2510951. Colleagues can prepare quotations, answer technical questions and name delivery times.

Press contact:
SKVTechnik
Klaus Doldinger
Strassberger Str. 31
08527 Plauen
Tel. +49172 7799600

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com