Category Archives: Trading Services

Trading Services

SKVTechnik recommends: Using safety valves when operating side channel blowers

The use of pressure / vacuum safety valves is not mandatory when using side channel blowers. However, SKVTechnik strongly recommends installation in the pressure or suction line.

SKVTechnik recommends: Using safety valves when operating side channel blowers

pressure / vacuum safety valves – how to install this parts

Side channel blowers of SKVTechnik have to be protected against total failure for various reasons. For one, financial reasons play a role, of course.
Another important point is that side channel blowers are usually in operation as endurance runners. They perform their work in many plants without the need for daily control. Often, the sub-processes in which side channel blowers are used are system-critical. This means that the failure of a side channel blower can lead to system stop. Production failure and downtime of the plant threaten.
What few users know is that side channel blowers do not have their own shutdown device for an emergency situation. Few devices have a shutdown device in case of overheating. Especially if side channel blowers work against a closed throttle, then the total loss of the device threatens. If side channel blowers work against a closed flap and can not deliver air, the pressure rises above the maximum pressure values indicated in the curves and the machine will inevitably break down. Users then find faulty electric motors and deformed rotors on the defective machines. In most cases, parts of the machine housing are discolored blue or dark due to overheating and the blades of the rotors inside the machines are bent due to excessive pressure conditions.

Side channel blowers should always be protected from full throttle closure. Users can do this with so-called pressure / vacuum safety valves. Safety valves are installed in the suction or discharge line of a side channel blower. During commissioning, the safety valves are set to the maximum pressure values of the machine to be secured and trigger when the permissible pressure values are exceeded. The balancing effect of the safety valves means that the machine / side channel blower can never enter the critical, non-permissible pressure zones because the safety valves open the pressure or suction line in advance. This ensures that the side channel blower can be safely operated as a long-running even without supervision.

Safety valves for side channel blowers can be purchased at a fraction of the cost of a side channel blower. There are models for printing and vacuuming and models that can be used universally. Particularly flexible valve variants can also be adjusted by the customer and can thus be used very flexibly and with different devices. Together with a manometer, users are thus able to install safety valves themselves and set them reliably. At SKVTechnik customers already receive professional valves for 100 to 200 euros.

SKVTechnik is an online retailer of side channel blowers. Over three hundred different machine types are available. Customers are expertly operated by manufacturer consultants and thus receive the best advice from professionally trained personnel for the most favorable machine prices.
Customers are testing SKV technology.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnology Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Work at a Business Center

De Soet Consulting offers great offices

Work at a Business Center

The concept of a Business Center is actually rather simple, yet it is very effective. Whether as a short term or a long term solution, the offices are completely equipped with a perfect office infrastructure and high qualified employees. De Soet Consulting is a Business Center with a very good reputation and a lot of experience.

Renting an office at De Soet Consulting is a perfect solution if you want to expand your business to a different region. It is simple, uncomplicated and cheap. You do not have any launching costs, no investments and a flexible term of lease. Rieta de Soet, CEO of De Soet Consulting says, the availability of offices in a Business Center is a great benefit for companies coming from abroad, because they get a helping hand from the employees who speak the local language and know the culture and costums.

It is also a good solution for a young entrepreneur, who wants to start self-employment. He gets all the help and information he needs from an experienced and high qualified staff.

Furthermore De Soet Consulting offers an individual telephone service, backoffice, marketing service, translating services, conference rooms and helps building up your marketing organization. No matter what your needs are, De Soet Consulting offers a personal and professional service to absolutely amazing prices, says Dr. Fabian de Soet.

De Soet Consulting ist eine Beratungsgesellschaft mit einem Team von Betriebswirten, Steuerberatern, Marketing- und Unternehmensberatern, die über eine 20-jährige Beratungserfahrung verfügen. De Soet Consulting betreut weltweit in Amerika, Asien und Europa Kunden, die ihren bisherigen Standort verlagern oder eine neue Firma gründen wollen. De Soet Consulting bietet Komplettlösungen für Unternehmen an, die ihren Standort verlegen oder einen neuen Standort gründen wollen.

Contact
De Soet Consulting
Rieta Vanessa
Gubelstrasse 12
6300 Zug
Phone: 0041 41 560 36 00
E-Mail: pr@news-channel.ch
Url: http://www.desoet.ch

Trading Services

Side channel blower – Adjust the limitation valves professionally

Limit valves are essential for the safe operation of side channel blowers. Side channel blowers operate in suction mode and in pressure mode. Secure limit valves.

Side channel blower - Adjust the limitation valves professionally

side channel blower – ATEX relevant

The safety valve (limiting valve F) described here by SKVTechnik can be used both as a pressure limiting valve and for operation as a vacuum limiting valve. It is delivered not parameterized in the factory and must therefore be set by the customer before use.

Why is it important to use a limit valve?
Side channel blowers are valuable devices that usually run in continuous operation and unattended. If the suction or pressure channel is closed, then the side channel blower motors continue to work and build up enormous pressure. The force can not be carried away with the air and the rotor presses more and more against the compression. The rotor blades twist. If necessary, the device heats up so much during this process that the winding insulation of the motor melts and a short circuit occurs. The machine suffers a total loss with a damage amount exceeding the replacement cost.

How does a limit valve work?
If they are correctly adjusted, the SKV limit valves act as a safeguard against excessive pressure. If the predefined pressure builds up in the machine and is exceeded, then limit valves open the airflow and the machine can release excess pressure from the system. The machine can continue to work and will not break. It is important that the operating point of the limit valve is correctly set to the respective machine.

How to adjust the limit valves of the SKVTechnik?
The limiting valve of the SKVTechnik is individually applicable to the different side channel compressors in the range from 0,2KW to 25 kW. For this purpose, the valve is supplied with two springs of different strengths. Each spring is designed for a specific pressure-vacuum power range. Valves VRL8 and VRL9 have the possibility to use both springs in parallel. Customers convince themselves with the supplied selection diagram that the valve is the right size and depending on the operating point select one of the two springs or both springs from the overview table (see also here: http://seitenkanalverdichter-technik.de/produkt/begrenzungsventile/) ,
* Remove the two plastic caps
* Attach the valve to the pressure bypass and connect a pressure gauge.
* Loosen the screw 923 (description enclosed) and reduce the spring pressure on the upper adjusting screw with the adjusting key supplied.
* Turn on the fan and create the maximum pressure.
* Adjust the upper adjusting screw until the maximum permissible pressure is reached (observe manufacturer’s instructions).
* Fix the screw 923.
* Opening the pressure channel.
* Carefully check the settings.

If customers have further questions for the use of side channel blowers, then they simply turn to the experts of SKVTechnik. A team of employees takes care of the solutions for customers and their plants. SKVTechnik calculates and offers designs for side channel blowers. Consultations on site are possible. Delivery times of 1 – 2 weeks or units on trial are normal delivery times.
Another major field of activity of SKVTechnik is the sale of side channel compressors as well as the sale of fans. Since 2015 SKVTechnik has been trading with fans from different manufacturers. Fans are highly individually equipped machines, which are usually adapted to customer requirements. When searching for solutions with fans, customers are most likely to contact SKVTechnik’s sales department directly.

Press contact:
SKVTechnik Klaus Doldinger Straßberger Str. 31 08527 Plauen Phone +49172 7799600

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products. || SKV Technik ist ein Online-Händler, der nur Seitenkanalgebläse und Ventilatoren in seinem Programm hat. Schneller Service und 3 Jahre Garantie auf die meisten Produkte.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Printing on polyester Textiles

Unique solution for printing polyester based surfaces and textiles with Ghost Sublime toner for laser printers.

Printing on polyester Textiles

Products made using Ghost Sublime

Ghost White Toner is best known for offering white toner cartridges for various HP, Samsung and Lexmark office laser printers. By replacing the black toner cartridge with a Ghost White Toner, customers can transform their laser printer into a white toner printer. In combination with transfer films for textiles or solid surfaces, dark textiles and other products can be easily personalized.

Sublimation printing is a widely used process for printing on various polyester or polymer-coated surfaces. In this process, a dye becomes gaseous under heat and pressure and thus transfers the design permanently into the substrate. Common substrates are mobile phone cases, mugs, t-shirts, banners, flags, trophies and other merchandise items.

This technology was only available on inkjet printers. With Ghost Sublime Toner, customers can easily transform their HP laser printer into a sublimation printer by replacing the standard CMYK toner cartridges with a set of Ghost Sublime Toner CMYK. Designs such as photos, vector graphics and logos, printed on plain copy paper can now easily be transferred to sublimation-friendly surfaces.
No special software or transfer paper is required for sublimation printing with Ghost Sublime Toner.
Ghost Sublime toner is now available for HP Color Laserjet Pro M452 and HP Color Laserjet Pro M252. In these devices, the tried and tested Ghost White Toners can also be used to personalize dark surfaces and textiles. The investment in different systems for toner transfer and sublimation is no longer necessary.

Ghost White Toner and Ghost Sublime Toner can be tested live at FESPA Europe in Berlin. Visit us in hall 4.1 booth D60
FESPA GLOBAL PRINT EXPO 2018
15.05. – 18.05.2018 MESSE BERLIN

Ghost GmbH aus Düsseldorf ist ein 2015 gegründetes Start-Up, das den Weißdruck auf Laserdruckern erstmals einer breiten Kundengruppe öffnet. Firmengründer David Kandelhardt ist seit 15 Jahren in der Drucker-Branche aktiv. Ghost will den Weißdruck auf Laserprintern salonfähig machen.

Mehr Infos:
Web: http://www.ghost-white-toner.com/

Social Media:
https://www.facebook.com/ghostwhitetoner
https://instagram.com/ghostwhitetoner/
https://www.pinterest.com/ghostwhitetoner/
https://twitter.com/ghostwhitetoner

Contact
Ghost GmbH
David M. Kandelhardt
Vogelsanger Weg 38
40470 Düsseldorf
Phone: 0211-37067-55
E-Mail: mail@ghost-white-toner.com
Url: http://www.ghost-white-toner.com

Trading Services

Side channel blowers – background knowledge on faults, defects and maintenance

SKVTechnik reports on proper behavior in case of faults, defects and maintenance of side channel blowers.

Side channel blowers - background knowledge on faults, defects and maintenance

Installation instructions for side channel blowers

Maintenance ( SKVTechnik hints for maintenance):

Before starting scheduled maintenance or before repairing or repairing the device, take the following precautions:

– Turn off the main switch to disconnect the device from the mains.
– Attach a sign to the system control and controls of the device with the inscription: „DANGER! Maintenance work in progress. „
– Let the device cool down!

– Wait until the device is completely stopped, d. h., The fan of the electric motor and consequently the impeller no longer rotates.
– Before disconnecting lines, make sure that there is no negative pressure or overpressure in them and that no liquids can escape from the device or system!
– Observe the maintenance instructions in this operating manual.

Risk of cutting or shearing due to the impeller rotation.
Through the openings of the machine housing and cover, after removing the connecting elbows or blind flanges, access is gained to the rotating impeller! In no case the hands or objects by the o. G. Insert openings.

Dangerous electrical voltage!
Inappropriate behavior can cause serious injury! Work on the electrical equipment may only be carried out by qualified and qualified electricians! Before working on the device or the system, the following precautions must be taken:
– Disconnect the mains voltage;
– secure the device against restart;
– only open the terminal box after making sure that there is no voltage.

Danger due to hot surfaces!
Under operating conditions, the unit could overheat, exposing the operator to hot surfaces. Do not touch the device during operation. Let it cool after switching off and wait at least 20 minutes before any intervention.
Danger due to rotating components: Cooling fan of the electric motor.
Although all measures have been taken to reduce the existing hazards during development, there are residual risks due to fan rotation.

Protective measures against risks:
– Do not wear loose or hanging clothes.
– Do not approach with open long hair.

Danger due to the noise level of the device!
Some machines can develop a high level of noise, even over 80 dB (A). The reference values (without consideration of the room reverb) are given in the table of technical data. Protective measures against risks:
Determine the actual sound pressure of the machine at the installation site and if necessary:
– Mark areas with noise hazard accordingly
– prescribe the use of PPE
– isolate the room.

SKVTechnik is an online retailer of side channel blowers. Over three hundred different machine types are available. Customers are expertly operated by manufacturer consultants and thus receive the best advice from a professionally trained specialist for small machine prices.
Customers are testing SKV technology. Rebates are almost 100% passed on to customers, which keeps customers‘ purchase prices low.

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnik ATEX Representative
Strassberger Str. 31
08527 Plauen
Tel. +49 3741 2510951

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Side channel blower – SKVTechnik ships within Europe within one week

The side channel blowers from SKVTechnik will ship within Europe within one week. Good prices and super quality are the trademarks of the online retailer from Germany. Now there are short delivery times in European countries.

Side channel blower - SKVTechnik ships within Europe within one week

Various connection types of side channel blowers for different system requirements.

SKVTechnik – the online retailer of side channel compressors and fans has been on the market since 2012. Users receive the complete range of side channel blowers and fans from various German and European brand manufacturers. From the smallest 0.2 kW device to the power compressor with 25 kW power and 300 kg machine weight.

SKVTechnik buys side channel compressors in large quantities at favorable conditions from the manufacturers and sells these stocks with good prices to the users. The prerequisite for the long-standing existence of SKVTechnik is reliability, brand loyalty and brand quality. Chinese products are no longer offered. The devices have between statutory two years and voluntarily granted 3 years warranty. SKVTechnik can only do this in the background with strong manufacturer partners.

Which machine types are in the permanent offer? These are side channel blowers and fans. Here is a brief overview of the principles of action:

Side channel compressors draw in air from the environment or from a process and produce pulsation-free and oil-free compressed air. The side channel compressor runs largely without mechanical loss. Although only a hundredth of a millimeter gap is between the rotor and the stator, the rotor still runs without contact against the stator. This makes the side channel compressor a perennial. The side channel blowers of SKVTechnik are of course designed for continuous operation. Side channel blowers often last for years with good care and occasional maintenance.

Fans have a different operating principle than the side channel blowers. Fans operate at much higher flow rates and much lower pressure than the side channel blowers. Fans often have larger gaps between rotor and stator and, depending on the design of the fan, also transport solids. Due to the volume-pressure characteristics mentioned above, fans are used for applications other than side channel blowers.

SKVTechnik offers both machine types and operating principles. If customers are interested in consulting, SKVTechnik specialists will be happy to evaluate customer plant situations and propose or offer suitable equipment for customers.

Short delivery times are required:
The delivery times are short. 80 percent of the side channel blowers are in stock at SKVTechnik. If side channel blowers are available on stock, then on a Monday order, the device will be on the customer’s Friday. Depending on the storage location, customers can pick up the devices on site.

In this specific case, interested parties can contact the hotline of SKVTechnik +49 3741 2510951. Colleagues can prepare quotations, answer technical questions and name delivery times.

Press contact:
SKVTechnik
Klaus Doldinger
Strassberger Str. 31
08527 Plauen
Tel. +49172 7799600

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

International standards for the classification of low-voltage motors – SKVTechnik recommends

SKVTechnik is an international online retailer that only offers side channel compressors and fans from various brand manufacturers and distributes them from Germany to neighboring European countries.

International standards for the classification of low-voltage motors - SKVTechnik recommends

cRUus

Today, SKVTechnik reports on the various low-voltage motors offered and their international classification standard.

-EFF1-
Electric motors have been divided into different efficiency classes in Europe for several years. Then three-phase motors power range between 1.1 and 90 kW (exclusively two- and four-pole motors) divided into three so-called efficiency classes („eff classes“ eff = Efficiency). For global standardization, therefore, the new international standard IEC 60034-30 (Rotating electrical machines – Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE code) was created.
This classifies the low-voltage asynchronous motors into new efficiency classes (valid since Oct. 2008). The efficiencies in IEC 60034-30 are based on the determination of loss according to the standard part IEC 60034-2-1. This has been valid since November 2007 and will replace all previous IEC 60034-2 standards from November 2010. The additional losses are now measured and no longer added pauachally.
The new efficiency classes receive a new nomenclature:
IE1 (Standard Efficiency),
IE2 (High Efficiency),
IE3 (Premium Efficiency),
IE = International Efficiency.

Advantages of efficiency class 1 engine
_____________________________
The lower thermal stress increases the life of the motors
Less waste heat is emitted to the environment
Downtimes and maintenance costs of the systems decrease
The tolerance to overloading; Voltage fluctuations; higher ambient temperatures etc. is improved

The voltages and voltage ranges marked with cRUus are in accordance with UL 507 and CSA 22.2 no. 113 certified.
Machines that meet these requirements are marked with the certification mark cRUus (component recognition mark).
Other certification marks are no longer accepted by consumer authorities and insurance companies in the US and Canada.

SKVTechnik recommends customers today:
The S6-2- 320 m³ / h | 3 kW | +260 mbar | -280 mbar | 3phases | 1129 | E
The S6 builds with the 3 kW engine (cRUus certified) a maximum volume of 320 m³ at a maximum ultimate pressure of 280 mbar. The three-phase motor is approved for the strict energy efficiency guidelines in Canada and the USA and can of course be operated with a frequency converter. The machine weighs 48 kg and can also be purchased as a 4.0kW device, a 5.5kW device and a 7.5kW device.
Customers can read the data prices of this machine here:
http://skvtechnik.com/product/1129e/

Press contact:
SKVTechnik
Werner Bernberger – SKVTechnik ATEX Representative
Strassberger Str. 31
08527 Plauen
Tel. 0172 7799600

SKV Technik is an online retailer that has only side channel blowers and fans in its program. Fast service and 3 years warranty on most products.

Contact
SKVTechnik
Melanie Schreiber
Straßberger Straße 31
08527 Plauen
Phone: 01727799600
E-Mail: pressemitteilungen@skvtechnik.com
Url: http://www.skvtechnik.com

Trading Services

Immediate office space

Finding a good office space can be difficult

Immediate office space

Finding a good location for your business does not have to be Mission Impossible. If you want to rent an office, the most important question is where and for how long. You can start from there. Of course the budget also plays an important role. Mrs. Rieta Vanessa de Soet, CEO of De Soet Consulting has one easy answer. „Come in and start your business with us.“ It is as simple as it sounds.

De Soet Consulting offers Business Centers with a complete infrastructure for consultants who need an office for a few weeks or for enterpreneurs, who would like to test the market before they decide for a location or for start-ups.

According to Rieta Vanessa de Soet, Business Center are a good alternative for manager and freelancer. Flexibility is the keyword. Adjustable office size, furniture, term of lease and service. The De Soet Consulting Business Center are full of opportunities. There is no problem which can not be fixed.

Mrs. de Soet says, analysis have shown that Business Center have a lot of benefits compared to ordinary rented premises. The financial aspect is not the only benefit. Business Center can be used immediately and they are completely equipped.

There have never been so many options for finding the best office solution, says Rieta Vanessa de Soet. If you still prefer to work in your own office, you have to calculate high costs for furniture, rent and long term contracts.

People who like to take care of anything, will be enthusiastic about the concept of a Business Center. De Soet Consulting offers qualified employees, for example a secretary, a business economist and a tax consultant, who are available on demand.

De Soet Consulting ist eine Beratungsgesellschaft mit einem Team von Betriebswirten, Steuerberatern, Marketing- und Unternehmensberatern, die über eine 20-jährige Beratungserfahrung verfügen. De Soet Consulting betreut weltweit in Amerika, Asien und Europa Kunden, die ihren bisherigen Standort verlagern oder eine neue Firma gründen wollen. De Soet Consulting bietet Komplettlösungen für Unternehmen an, die ihren Standort verlegen oder einen neuen Standort gründen wollen.

Contact
De Soet Consulting
Rieta Vanessa
Gubelstrasse 12
6300 Zug
Phone: 0041 41 560 36 00
E-Mail: pr@news-channel.ch
Url: http://www.desoet.ch

Trading Services

MIHAS in Kuala Lumpur showcases Halal products and services

The world“s largest halal trade show returns for its highly-anticipated 15th edition.

MIHAS in Kuala Lumpur showcases Halal products and services

MIHAS 2018 will be held from 4-7 April 2018 in Kuala Lumpur, Malaysia

Malaysia is once again setting itself up as a leading influencer and industry player in the global Halal economy by hosting the 15th Malaysia International Halal Showcase (MIHAS) from 4th to 7th April 2018 at Malaysia International Trade and Exhibition Centre (MITEC), Kuala Lumpur, Malaysia.

The highly anticipated signature event will bring together global Halal brands and gather leading industry players and thought leaders from around the world for four days of trade, networking and knowledge sharing.

Organised by Malaysia External Trade Development Corporation (MATRADE) under the patronage of Ministry of International Trade and Industry of Malaysia, MIHAS is the largest Halal trade event of its kind in the world. Whilst the exhibition logged its largest edition in 2017, recording 22,000 visitors from 80 countries, this year MIHAS is set to double in size. The exhibition features products and services across seven industry sectors: Food and Beverage, Pharmaceuticals, Cosmetics, Tourism, Finance, Logistics and E-commerce.

According to Ir. Dr. Mohd Shahreen Zainooreen Madros, Chief Executive Officer of MATRADE, „the overwhelming interest in MIHAS reflects the bullish sentiment of the global Halal industry. Of the 800 companies that are expected to participate this year, as high as 32% of exhibitors are new-to-market while the remaining 68% are repeat and long-term participants“.

„41 countries so far have registered interest to participate, representing 45% of the total occupancy of MIHAS 2018; the rest, of course, being Malaysian companies. I am happy to note that India are among the top 6 countries having the largest pavilion at MIHAS, alongside Thailand, Indonesia, Taiwan, Iran and China“, he added.

MIHAS has been a highly effective sourcing platform, steadily recording over USD 4 billion in cumulative trade for its participants. As the world“s largest Halal tradeshow, MIHAS will continue to lead and serve the industry by fostering business and investment in the Halal domain.
This year, buyers at the exhibition can expect to find the latest Halal product offerings and services across industry value chains. From Halal ingredients to semi-finished products and manufactured goods, to packaging and logistics, to Shariah-compliant financing and Takaful, MIHAS has become an indispensable annual one-stop centre for traders in this burgeoning economic sector.

Thomson Reuters in its latest State of The Global Islamic Economy Report predicts that the potential size of the Muslim market will reach USD 3.081 Trillion by 2022. Total Muslim spend across lifestyle sectors already represents nearly 12% of global expenditure. The number of exhibitors MIHAS has received this year is very promising.

It will be welcoming 10 countries which have not previously participated in MIHAS before with at least 40 countries participating as exhibitors.
MIHAS 2018 is also projected to double the number of participating exhibitors, from 612 booths to 1200 booths, making this year the most comprehensive and highly-anticipated edition of MIHAS for buyers that is expected to draw a very large crowd.

Malaysian manufacturers and distributors will comprise half of the participating companies, reflecting keen support and interest from local players as well as the international. This year, top foreign countries exhibiting are from Thailand, Indonesia, Taiwan, China and Philippines.
With these encouraging responses from local and international companies, it is evident more companies worldwide recognise the value of participating in MIHAS. This is supported by the fact that almost 70% of exhibitors are returning exhibitors. With the addition of newcomers in this year“s exhibition, MIHAS 2018 is also set to offer a wider range of products.

Visitors to MIHAS 2018 this year can expect a lot more than just a diverse international glimpse into Halal products and services. Alongside the exhibition is a multitude of programmes and engagements designed to keep buyers and traders alike informed on the latest developments and trends in the Halal industry by experts from around the world.

MIHAS programmes are jointly organised by MATRADE with various stakeholders that include JAKIM, the world“s leading Halal Accreditation and Certifying Body; Bank Negara Malaysia – Malaysia“s central bank; the Islamic Tourism Centre; the Malaysian Association of Travel and Tour Agents; and the Malaysia Retail Chain Association to name a few.

Issued by Malaysia External Trade Development Corporation (MATRADE)

Malaysia External Trade Promotion Corporation (MATRADE) is Malaysia“s national trade promotion agency under the Ministry of International Trade and Industry. MATRADE develops and promotes Malaysia“s global exports through 47 offices worldwide.
MATRADE organises the Malaysia International Halal Showcase (MIHAS).

Contact
MATRADE
Badrul Hilal
Platz der Einheit 1, 17. Etage 1
60327 Frankfurt
Phone: 069247501510
E-Mail: frankfurt@matrade.gov.my
Url: http://www.matrade.gov.my

Trading Services

Relocation Service

De Soet Consulting helps their customers to relocate

Rieta de Soet and De Soet Consulting Business Centers have been providing complete office solutions for more than 20 years. This service also includes a relocation service which is highly appreciated by the customers. The relocation service aims to support our customers to make moving easier, says Rieta De Soet, CEO of De Soet Consulting.

Everyone knows how time-consuming and nervewrecking moving can be. Although you are looking forward to the new apartment or the new house, nobody enjoys the weeks of preparation. To clear out the apartment, to pack boxes, to find diligent relocation helpers and then to unpack everything in the new accommodation and furnish it at home. This work often takes weeks or even months to finally finish.

De Soet Consulting offers their relocation service, to guarantee a stress-free move. Our relocation service plans, organizes and accompanies the move from all parts of the world to Switzerland and vice versa, says Rieta de Soet.

Rieta de Soet explains that if requested by the relocation team, all work related to the change of residence will be carried out. This includes finding a suitable school for the children, registering the car, looking for sports clubs, tennis clubs or golf clubs. Authorities are taken care of and we also register the radio and TV.

In a small training De Soet Consulting even introduces customers to the peculiarities of the host country.

As in the business center, De Soet Consulting provides tailor-made solutions, and the relocation team continues to provide advice and assistance after the move.

De Soet Consulting ist eine Beratungsgesellschaft mit einem Team von Betriebswirten, Steuerberatern, Marketing- und Unternehmensberatern, die über eine 20-jährige Beratungserfahrung verfügen. De Soet Consulting betreut weltweit in Amerika, Asien und Europa Kunden, die ihren bisherigen Standort verlagern oder eine neue Firma gründen wollen. De Soet Consulting bietet Komplettlösungen für Unternehmen an, die ihren Standort verlegen oder einen neuen Standort gründen wollen.

Contact
De Soet Consulting
Rieta Vanessa
Gubelstrasse 12
6300 Zug
Phone: 0041 41 560 36 00
E-Mail: pr@news-channel.ch
Url: http://www.desoet.ch